The system

Grown in the nursery. Green from day one.

We install the ANS Living Wall Module™ by Viritopia — a modular, soil-based living wall system. Modules are planted and established in a specialist nursery before they reach your building, then fixed to a rail system in days.

Sectional view of a pre-grown living wall module — soil, plants and module casing
Pre-grown module · sectional view
Module250 × 500 × 100 mm, soil-based
Coverage8 modules per m²
Planting density80 plants per m²
EstablishmentPre-grown in nursery before install
Climate rangeProven −40 °C to +40 °C
FireFire-retardant module option
IrrigationInline dripper, zoned
SubstratesBrick, concrete, cladding, steel frame

Build-ups for specifiers

Four tested build-ups, one for each substrate. Open a diagram for the full layer list.

From drawing to living wall

01 — Design
Specify

Plant design, build-up drawings and technical specification for your substrate — PDF, AutoCAD or 3D, in French or English.

02 — Grow
Pre-grow

Modules planted and established under nursery conditions, so the wall arrives mature, dense and ready to perform.

03 — Install
Fix & commission

First fix rails and membrane, second fix pre-grown modules, then irrigation commissioning. Days on site, not months.

What we deliver at design stage

Plant design, build-up drawings and a technical specification for your substrate — as PDF, AutoCAD or 3D, in French or English. Manufacturer data for structure, fire and irrigation goes to your engineers and consultants.

Questions

Which living wall system do you install?

The ANS Living Wall Module™ by Viritopia: soil-based modules of 250 × 500 × 100 mm, 8 modules per m², around 80 plants per m², with a fire-retardant option and four documented build-ups for brick, concrete, cladding and steel-frame substrates.

Why soil-based rather than felt or hydroponic?

Soil holds water, feeds roots and buffers temperature swings. It's more forgiving when something goes wrong, and it's what lets the system run from −40 °C to +40 °C.

Can modules be cut to fit the wall?

Yes — modules can be trimmed in height and width to fit the wall, so the planted area follows your architecture.

What do other trades need to provide?

Future Ecosystems supplies and installs the wall, the modules and the irrigation system on the wall. The water supply, drainage connection and any electrical work are done by your plumber and electrician — your plumber connects our irrigation system to the mains. For interiors, lighting is part of the design: we'll ask for a lighting plan so the plants get what they need.

Enquire

Planning a facade, a lobby, or something nobody's built yet?

Send the site, the surface and the ambition. We'll come back with a build-up, a plant direction and an honest read on feasibility — usually within two working days.